Universal Remote DMS-100 Especificações descarregar pdf (Página 73)

Ringing in Series II peripherals 3-5

DMS-100 Ringing System

In the event that the monitor circuit detects a fault, the monitor and alarm

circuit raises a ringing generator alarm and operates the switchover relays to

switch the standby ringing generator to the active ringing generator. The

monitor and alarm circuit then activates a shut-down circuit in the faulty

ringing generator, which disconnects the faulty generator from the power

source and lights the shut-down light-emitting diode (LED) on the ringing

generator faceplate. The faulty ringing generator can be reset manually by the

reset switch.

If the power converter on the other side has failed, an automatic reset circuit

on the faulty ringing generator automatically attempts to restart the faulty

generator every 10 seconds.

SCM-100R

The SCM-100R provides a digital interface to the remote concentrator

terminal (RCT) of the DMS-1R system.

The SCM-100R was introduced into the DMS-100 system by feature package

NTX213. Feature package NTX213 is documented in Subscriber Carrier

Module-100 Rural General Description.

Ringing types supported by SCM-100R

The SCM-100R supports the following types of ringing:

• coded

• superimposed

• frequency selective

SCM-100R/RCT ringing conﬁguration

The SCM-100R/RCT ringing conﬁguration is shown in the following ﬁgure.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 ... 133 134

Sem comentários

Universal Remote DMS-100 Especificações Página 73