Universal Remote CAM-DC-I Instruções de Operação descarregar pdf (Página 18)

Part 3 - Remote Setup

• Miscellaneous

- ONVIF Protocol: Select to enable ONVIF

protocol use. However, ONVIF Protocol is

available only to users belonging to the standard

user groups (Administrator, Operator, and

User).

• Setup

- Load Default Setup: Restores all settings other

than Date/Time to their factory defaults. Select

Include Network Setup to load default network

settings as well. For more information on network

setup, refer to the Network on page 19.

- Import Setup: Open a setup file and apply its

settings to the camera. Click on the button and

then select a setup file. Select Include Network

Setup to apply the file's network setup settings

(exc. FEN). For more information on network

setup, refer to the Network on page 19.

- Export Setup: Export the current settings as a

.dat file. Click on the button and then enter a file

name.

• Load Default Setup and Import Setup

options are available only to users belonging to

the Administrator group.

• When applying the settings of a setup file, do

not select the Include Network Setup option

if the network settings contained in the selected

file is currently being used by a different camera.

Doing so can interfere with establishing a

connection with the other camera.

• If IP Address, Admin Port, and/or SSL settings

have been changed, Remote Setup will

terminate after applying the current settings.

Date/Time

• Date/Time: Change the camera's date/time

settings and display formats and configure the time

zone and daylight saving time settings. Click Apply

to apply the changes right away.

• Time Sync

- Automatic Sync: Select to synchronize the

system's time with the time server at a specified

interval. Enter the time server's IP address or

domain name and then specify the interval. If the

time server is FEN-enabled, select the Use FEN

option and then enter the time server's name

instead of its IP address or domain name.

- Run as Server: Select to run the camera as a

time server. Other devices will then be able to

synchronize its time setting with this camera's

time setting.

If you wish to enter a domain name instead of

an IP address for the Time Server setting, DNS

server must be configured during Network setup.

If you wish to enter a server name instead of an IP

address or a domain name, the Use FEN option

must be enabled during Network setup.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 48 49

Comentários a estes Manuais

Sem comentários

Universal Remote CAM-DC-I Instruções de Operação Página 18

Comentários a estes Manuais

Manuais e produtos relacionados com Câmaras de segurança Universal Remote CAM-DC-I